

XDX
Over Inflator
Designed for specialised tyre fitting applications, the XDX Over Inflator features two displays with independent pressure settings, three programmable preset buttons and stop / start buttons.
The XDX can also be used in bead inspection mode where a partial inflation allows the operator to confirm before proceeding to the target pressure.
Part number: 89XDX-1014
Accurate and easy to use with built in safety features
Three programmable preset buttons
Emergency STOP button, high reliability mechanical switches
Nitrogen compatible
How does it work?



Set
the desired test pressure using the increase or decrease buttons.
Connect
securely the air hose to test vessel and Press Start.
Inflate
to the pressure set on the top display and hold for a set time then deflate to the pressure set on the lower screen.
Specifications
Construction | Die Cast Aluminium Enclosure, IP66 rating |
Dimensions | 270W x 285H x 110D mm |
Power Requirements | 220~240VAC (optional 12VDC) |
Unit of Measurement | psi / kPa | Operating Range | 5~145psi / 35~1000kPa |
Accuracy ± | ± 0.5% Full Scale |